Which of your CO2 regulators work with the CAP XGC-1 Extreme Greenhouse Controller?
We suggest the C.A.P. SO2 regulator for this controller: http://www.greners.com/cap-co2-regulator-flowgauge-0-5-15-scfh.html
The XGC-1 Xtreme Greenhouse Controller from C.A.P. controls ALL your equipment with ONE compact, reliable controller!
The XGC-1 Xtreme Greenhouse Controller controls all of the main devices required in today's modern hydroponic garden. Your garden's HID lights are controlled by a precision 24-hour time clock. Two outlets are provided for your lights. Hydroponic pumps are also coordinated with the time clock. Two of the outlets on the CGC-1 are for your exhaust fans or air conditioner. A built-in thermostat and humistat handle the growing area's temperature and humidity control functions. The two pump outlets allow your water pumps to be controlled by the built in Adjustable Recycling Timer. A selector switch allows the user to determine if the hydroponic pumps are to cycle only when the lights are ON or 24 hours a day. An auxiliary NIGHT outlet is activated when the lights are turned off. It is perfect for controlling humidity at night using a dehumidifier or for a separate heater.
Supplemental CO2 is coordinated to work in harmony with your exhaust fan's temperature and humidity control functions. When the exhaust fans are running, the CO2 outlet is disabled to conserve CO2. Two standard built in timers control your CO2 valve or generator. The CGC-1 can be upgraded to Part Per Million accuracy by plugging in the PPM-1c CO2 monitor. The CGC-1 is rated for 15 amps @ 120 volts. The XGC-1 has the addition of Fuzzy Logic CO2 control built in! Fuzzy Logic can be compared to a good driver. As a good driver approaches a red light, he or she applies the brakes to gradually slow down BEFORE getting to the intersection. Fuzzy Logic uses the same idea to keep the CO2 level at your desired setting, without going over the set point.