Are these designed to Blow air or Suck air, Where should they be placed?
They work for both blowing and sucking so you can place it on the end that is most convenient for your setup (or in the middle if that works better).
I have a 500 sq. foot basement that, even with a rebuild, still maintains a musty odor. I want to put a fan at floor level and vent it out the rim joist to draw air from upstairs and move out the basement air. I would appreciate any advice or fan suggestions that you can offer.
Assuming 8 foot ceilings, that is 4000 cubic feet. A 6" Vortex power fan will draw 452 CFMs, and is capable of evacuating the air in the room every 9 minutes. A 12" powerfan will do the same in three and a half minutes. However, to fully realize these CFMs, you will likely want to connect the fan to a system of ducting with multiple inlets. You can view our ducting parts here: http://www.greners.com/fans-ventilation-filters/products/ducting-parts.html My concern is the source of the musty odors. While fresh air should help, you may have an unseen source of mold or mildew.
hi i was just curious, does this fan operate on both 120V or 240V power outlets or just 120v? If it does not do you by any chance stock any in 240v?
Hello, Vortex power fans only run on 120v outlets.
How many amps do the Vortex inline fans draw for the 4" 6", 8", 10", and 12" respectively?
-The 4" Vortex Powerfans pull .65 Amps at 80 watts. -The 6" Vortex Powerfans pull .80 Amps at 100 watts. -The 8" Vortex Powerfans pull 1.60 Amps at 185 watts. -The 10" Vortex Powerfans pull 2.00 Amps at 224 watts. -The 12" Vortex Powerfans pull 3.20 Amps at 400 watts.
How do I figure out how many CFM's are needed to efficiently ventilate my grow space?
Multiply your length, height, and width of the grow area, and that is how many CFM's you will need to efficiently ventilate!
Do these fans come with a thermostat?
No, the Vortex Inline Fans to not come equipped with a thermostat device.
Vortex Powerfans are high performance inline duct blowers constructed from quality steel with heavy duty attractive hammertone powdered coat finish. The extended collar allows for easy duct installation and taping. Superior quality and smart design ensure vibration-free operation with balanced motorized impellers with permanently lubricated ball bearings. Include 6' power cords, and galvanized mounting brackets allowing both horizontal and vertical installation.
Other features include:
Airflow:
4" - 175 CFM
5" - 204 CFM
6" - 452 CFM
8" - 747 CFM
10" - 790 CFM
12" - 1140 CFM
12" V-Series HO - 2050 CFM